esv-01.23 GROUND IN POST SUPPORTS Hex flange for PWM Adjustable bracket PWH KR name coat. art no. dimensions [mm] holes [mm] weight [g] pack. [pcs] a ≠ ø12 ø14 ø18 PWH 1 ● 482867 160 8,00 3 6 1 1 300 20 name coat. art no. dimensions [mm] holes [mm] weight [g] pack. [pcs] a b c ≠ ø14 ø13 14/30 KR 8 ● 42113 130 70 65 5,00 3 6 1 135 4 Application A hex plate designed to be connected to steel components (welding). Welded profiles or I-beams can then be connected to PWM supports or support extensions. The lack of corrosion protection allows safe welding. Material S235 + oil film. Mounting Wood: wood screws – CTO ø10; wood screws – PWD ø10; steel: M10, M12 metric screws. coating: ● oil film coating: ● S235 + hot dip zinc PWH 1 KR 8 a ● ● Application The bracket is designed for supports with a rectangular or hex plate and allows the fastening and adjustment of beams with a rectangular or square cross-section. It has adjustable holes to make it easier to install non-standard elements and to eliminate expansion stress. The ability of the components to move against each other means that there are no loads in the joint from deformation or changes in the moisture content of the wood. Material DX51D + Z275. Mounting Wood: wood screws – CTO ø10; wood screws – PWD ø10, PNP set, M12 lock screws; steel: M12, M14 metric screws. PWH KR8 assembly assembly see page 30 see page 29 a b c I]hhb]ҹ MeXbh] @] Iӌ=bh ҹ Xee ?aŲh]mҹ P=FKQ SRI>=P qqqҶe]hhb]ӝZpҶ^l
RkJQdWJsaXNoZXIy MTQ0MjA1