esv-01.23 GROUND IN POST SUPPORTS 1Determine the distances at which the posts should be placed. 2Using a long drill bit, drill a pilot hole to check the ground and remove minor obstructions. 3Fill the hole with water to allow better feed when screwing in the support. 4 Use a spirit level to check the correct alignment of the post supports. 5 Using a metal bar, PWKT spanner or PWPP planetary gear screwdriver, screw the support into the base. 6Set the post in the support by backfilling it with granite grit, so that it is stiffened and locked in place.
RkJQdWJsaXNoZXIy MTQ0MjA1